|
With T1/E1/PRI Interfaces
Integrated H.323 gateway and gatekeeper
Up to 30 simultaneous VoIP calls
IVR/RADIUS AAA compliant
|
|
The Tenor Digital series gives multi-location enterprises an easy,
cost-effective way to capitalize on the power of Voice over IP (VoIP).
With its MultiPath architecture, the Tenor connects to the data network
through a 10/100 Ethernet interface, and to the enterprise and public
voice network through a T1, E1, or PRI interface. From this position,
the Tenor employs its patented SelectNet™ technology to monitor calls
for jitter, packet loss, and latency, and can transparently switch
mid-call to the voice network whenever conditions demand.
With this unique switching intelligence, the Tenor makes VoIP both
easy and risk-free.
Additionally, Tenor MultiPath has built-in Intelligence for
- routing calls between the PBX, the PSTN, and the IP network, to
achieve the best combination of cost and quality; it can route calls
over IP to reduce costs, and then transparently “hop off” to the
PSTN, to reach off-net locations. No other VoIP solution can match
this flexibility.
- easy unobtrusive installation on existing voice and data networks
- it can be installed without upgrades to the existing voice or data
networks.
- pass-through call routing to the existing voice network in the
event of system malfunction – even a total power failure.
- efficient use of available bandwidth – with its PacketSaver™
technology, Tenor MultiPath reduces bandwidth consumption up to 50%,
by combining voice packets from several calls into a single packet
to minimize packet overhead. (this is an
optional feature that requires software upgrade)
- greater security as it can operate behind NAT-enabled firewalls;
its innovative NATAccess™ solution overcomes the problem of NAT
firewalls not correctly translating internal IP addresses into
public addresses when a VoIP call is established with an outside
party.
Specifications
CALL MANAGEMENT FEATURES
- Automatic call type detection: Voice/Modem/Fax
- Trunk group support
- Public and private dial plan support
- Automated load balancing
- Forced routing
- Pass-through support for calls to 800, 911, 411, etc.
- Automatic appending and stripping of digits to dialed numbers
- Call Detail Records
TECHNICAL SPECIFICATIONS
Telephony Specifications
- Voice algorithms: G.723.1a, G.711, G.729ab
- Fax support: T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps
- Coding: A-law, µ-law
- Enhanced Echo Cancellation. ITU Rec. G. 168, up to 128 ms tailsize
- PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan
INS-NET, KDD, 4ESS, 5ESS, DMS100
- T1/E1 Signaling: CAS/R2
- Dialing: DTMF
- Impedance: 120 Ohms balanced; T1-100 Ohms balanced
IP Network Specifications
- H.323 v.2 Gateway and Integrated Gatekeeper
- Silence suppression and comfort noise generation
- IVR/RADIUS server support for AAA
- LAN Interface: Autosensing 10/100 Mbps Ethernet
- Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T
connection
- QoS Support: IP TOS
Configuration/Management
- Central provisioning and management
- Web-based Graphical User Interface (GUI)
- Alarm/Fault detection and reporting
- SNMP v1, v2 Agent
- Command Line Interface
- Remote Telnet Access
- Serial Console Port: RS-232/DB-9
General Specifications
- AC Power: 100-240 Volts AC, 50/60 Hz, 25 watts
- Operating temperature: 40-122° F (5-50° C)
- Operating humidity: 20-80% noncondensing
- Emissions: EN55022:98; EN55024:98; EN61000:95 FCC Part 15 Class A,
ICES-003
- Immunity: EN55024:98
- Safety: EN60950, UL 1950, CSA 22.2 No. 950
- Telco: FCC Part 68, CS-03, CTR4, CTR13
- Dimensions: 445 mm (W) x 45 mm (H) x 276 mm (D) (17 3/8” x 1
3/4” x 10 3/4”)
- Weight: 3.24 kg (7.2 lbs)
|
|
